Dr Dabber Ghost 2 Vaporizer

The Dr Dabber Ghost 2 Vaporizer is the one that started off the Dr Dabber range, and this Ghost 2 is the reimaging of the initial device that launched the brand to lofty heights. It has now been refined, recalibrated and revived for the modern dabbers. In the truest sense, the Ghost 2 embodies a true decade plus of innovative work, painstaking obsession and taking on feedback in the hopes of perfecting the portable dab. 

introduces Dynamic Heating Modes, bringing intelligent heat control to the portable wax pen category. These smart power curves automatically adjust in real time according to your draw, ensuring a consistent temperature, richer flavour, and smoother vapour density with every pull. It™s the same adaptive performance you™ll find in Dr. Dabber™s flagship Switch², now in a compact, pocket-friendly device. The Dynamic heating mode is a descending one meaning that by the time you finish your dab it will have dropped in temperature dramatically. 

Top Features: 

• Fully Ceramic Pathway for incredible flavour
• Passthrough Charging using USB-C for fast-charging 
• 5 Different Temperature Settings 

The original Ghost vapoirzer was the one that started it all... The Dr. Dabber Ghost²„ is a reimagining of the device that launched Dr. Dabber® back in 2013. Refined, re-engineered, and reborn for the modern era. The Ghost² embodies over a decade of innovation, feedback, and obsession with the perfect portable dab

Radial Sidewall Heating for Superior Performance

Ghost 2 debuts radial sidewall heating, an innovative chamber design that heats your concentrates evenly from all angles. This technology delivers faster heat-up times, bigger vapour output, and complete terpene preservation”meaning no cold spots, no hotspots, and absolutely no burnt hits. Just clean, full-spectrum flavour every time.

Clean, Isolated Vapour Pathway

Dr Dabber engineered the Ghost 2 with a fully isolated vapour pathway, keeping the flavour pure from chamber to mouthpiece. Every inhale is clean, smooth, and uncontaminated, giving you the authentic terp profile of your concentrates without interference. Full ceramic pathway.

Five Precision Temperature Settings

With five carefully calibrated temperature settings, the Ghost 2 lets you customise your sessions exactly how you like them. Enjoy low-temperature flavour dabs, denser cloud production, or anything in between”the Ghost 2™s precision design adapts effortlessly to your preferred style.

Pass-Through Charging for Continuous Sessions

The Dr Dabber Ghost 2 also supports pass-through charging, so you never have to pause a session. Simply plug in and continue vaping while the device powers up. Perfect for daily use, long evenings, or back-to-back sessions with friends.

Better Dabs, Every Time

The Ghost 2 is built for flavour chasers, cloud lovers, and anyone who wants a premium, low-heat concentrate experience in a portable form. Faster heating, cleaner vapour, better terp retention”everything about the Ghost 2 is designed to elevate your dab game.

What's inside the Box? 

• Dr. Dabber Ghost 2 Unit
• Silicon Mouthpiece (attatched to unit)
• USB-C Cable 
• Metal Dab Tool 

What temperature settings does the Dr Dabber Ghost² offer?

The Dr Dabber Ghost² Vaporizer includes five heat settings for flavour or cloud-focused sessions:

• Purple “ 420°F

• Blue “ 450°F

• Cyan “ 480°F

• Yellow “ 510°F

• White “ 540°F
  Lower temperatures enhance flavour, while higher temperatures boost vapour production.

2. How do I change the temperature on the Ghost²?

Click the button once to view the current temp setting.
Click again within 3 seconds to switch to a new temperature.
The LED will pulse in the corresponding colour.

3. What are the Dynamic Heating Modes on the Dr Dabber Ghost²?

Ghost² includes three Dynamic Heating Modes that control how the device heats during each cycle:

• Descent Mode: Temp slowly decreases (mimics natural cooling of a banger).

• Ascent Mode: Temp gradually increases (simulates torching as you inhale).

• Steady Mode: Holds a consistent temperature for the entire cycle.

4. How do I switch Dynamic Heating Modes?

Click the button 3 times.
LED animations indicate the selected mode:

• Downward = Descent

• Pulse = Steady

• Upward = Ascent

5. Does the Ghost² remember my settings?

Yes, the Ghost² automatically saves your last-used temperature and heating mode when powering on or off.

6. How do I load concentrates into the Dr Dabber Ghost²?

Open the flip-top lid and load ½ a pea-sized amount directly onto the bottom of the e-Chamber.
Avoid overloading”this restricts airflow and reduces vapour production.

7. How do I start a heating cycle on the Ghost²?

Click 2 times to begin:

• LED pulses red during heating

• Turns green + vibrates when ready
  Take long, slow draws for best results.

8. Can I cancel a heating cycle?

Yes”click the button once during heating to cancel the cycle.

9. How often should I replace my Ghost² e-Chamber?

e-Chambers are consumable parts and typically last 3“12 months, depending on use and cleaning habits.
Replace if you notice:

• Dark, burnt, or crusted buildup

• Cracks or visible damage

• Burnt flavour

• Leaking

• Poor vapour production

10. How do I recalibrate a new e-Chamber?

1. Turn off the unit and unplug it for 15 minutes.

2. Ensure chamber + device are at room temperature.

3. With unit off, click 4 times, holding the 4th click.

   • Green x3 = Successful

   • Red x3 = Unsuccessful (retry after cleaning contacts)

11. How long does the Ghost² battery last?

A full charge provides around 20 heating cycles.
Charging takes about 1 hour.

12. Does the Dr Dabber Ghost² support pass-through charging?

Yes”you can use the Ghost² while it charges via USB-C fast charging.

13. How do I check the battery level?

Click 4 times while the unit is on:

• Green: 70%+

• Yellow: 30“70%

• Red: Below 30%

14. How do I clean the Dr Dabber Ghost²?

• Soak the mouthpiece, silicone top & airflow regulator in ISO for up to 20 minutes

• Clean the e-Chamber using cotton swabs (never soak it)

• Let all parts dry for 20+ minutes

Avoid ISO on the device shell”it may damage the finish.

15. What do the Ghost² LED fault indicators mean?

• Yellow x3: Faulty chamber connection or dead chamber

• Red x3: Device overheating

• Pink x3: Short circuit or PCB fault

16. What should I do if the Ghost² isn™t heating?

Check:

• Battery charge

• Chamber fully threaded

• Clean contacts

• Chamber integrity

• Recalibration

• Try a new e-Chamber

17. How do I reset the Ghost² to factory settings?

With the unit off, click 8 times, holding the 8th click until the LED flashes red †’ green †’ blue.

18. Does the Dr Dabber Ghost² have auto-shutoff?

Yes, it automatically turns off after 15 minutes of inactivity to preserve battery life and safety.

19. What charger should I use for the Ghost²?

Only use the official USB-C charging cable included with the device for best performance and safety.

20. Can I soak the e-Chamber in ISO?

Never soak the e-Chamber.
It will cause permanent damage”clean only with a cotton swab.